Edwards 3-PPS/M Primary Power Supply
| Brand | Edwards |
|---|---|
| SKU | 3-PPS/M |
| Type | Power Supplies |
| Variants | 1 |
Edwards 3-PPS/M is the EST3 primary power supply with local rail monitor module, for 120 VAC 50/60 Hz. It consists of a high efficiency switch mode power supply card and a power supply monitor module that mounts on the local rail and shares its power with other rail modules and user interface cards. This model is discontinued.
The primary supply provides battery charging and voltage regulation for the system. Batteries are load tested automatically, battery leads are electronically short circuit protected, and the charger adjusts its rate to enclosure temperature or to a probe in a remote battery cabinet. Up to three booster supplies can be paralleled with it for up to 28 A in one enclosure.
Specifications
| Input voltage | 120 VAC (+10%, -15%), 50-60 Hz; 3.0 A input current |
| Output voltage | 24 VDC nominal |
| Output current | 7.0 A special applications; 4.5 A regulated total |
| Auxiliary outputs | Two 3.5 A sources, taken from total output current |
| Battery charging | Up to 65 Ah sealed lead-acid, temperature compensated |
| Low battery trouble | 24 VDC |
| Deep discharge cutoff | 19.5 VDC |
| Mounting | 1 local rail module space, 1 chassis footprint |
| Aux terminals | 18 to 12 AWG |
| Certifications | UL, ULC |
Installation notes
- Each battery set needs one charger, either a 3-PPS/M or a 3-BBC/M
- Connect each supply to its battery set with wire of identical length and gauge
- Distribute power supplies and loads evenly across rails
- All battery sets in a panel must match in capacity, manufacturer and date code
- Use the 3-BTSEN module when batteries are installed in a remote cabinet
Related models
- 3-PPS/M-230: 230 VAC version
- 3-BPS/M: booster power supply
- 3-BBC/M: booster/charger supply
- 4-PPS/M: EST4 primary power supply
Documents
FAQ
How much power does the 3-PPS/M provide?
7 A of filtered and regulated 24 VDC for special applications, or 4.5 A regulated in total including internal panel and auxiliary outputs. Two 3.5 A auxiliary outputs are taken from the total output current.
What batteries can it charge?
Sealed lead-acid batteries up to 65 Ah. Software sets the charger for 10 to 24 Ah or 30 to 65 Ah batteries, and the charge rate is temperature compensated.
Can power supplies be combined?
Yes. Up to four supplies, one primary and three boosters (3-BPS/M or 3-BBC/M), run in parallel in one enclosure for up to 28 A.
How much space does it take?
One local rail module space and one chassis footprint.
Questions about this product
Is Edwards 3-PPS/M Primary Power Supply in stock?
Yes — 43 units are available and ready to ship from our US warehouse.
How fast will Edwards 3-PPS/M Primary Power Supply ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does Edwards 3-PPS/M Primary Power Supply ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.