










MRDF-4
| Brand | Rockville |
|---|---|
| SKU | MRDF-4 |
| Type | Marine and Powersports~Marine~Amplifiers |
| Variants | 1 |
Give your boat speakers dedicated power without giving up much installation space. The Rockville MRDF-4 is a compact four-channel marine amplifier that delivers 175W RMS per channel at 2 ohms, for 700W RMS total. At 4 ohms, it supplies 115W RMS per channel, or 350W RMS per channel when configured as two bridged channels.
A conformal-coated circuit board helps protect the electronics from moisture and salt air. Stainless steel hardware, an aluminum-alloy heat sink, and a UV- and salt-resistant chassis suit marine installations. Included white silicone terminal covers help shield the power, ground, remote, and RCA connections from splashes and corrosion.
Full-range, high-pass, and low-pass modes let you configure the amplifier for your speaker setup. Adjustable filters from 50Hz to 250Hz help shape the frequencies sent to full-range speakers, component speakers, or compatible bridged subwoofers. Tiffany-style RCA inputs provide the signal connection, while power, status-mode, and clipping indicators make operating conditions easier to monitor.
The Class D design uses SMD components and a high-speed MOSFET power supply, with rated efficiency of 76% at 2 ohms and 85% at 4 ohms. Its 10.43-inch-long chassis fits into smaller installation spaces; check available clearance for the amplifier, wiring, and terminal covers before mounting. Thermal, short-circuit, and over-voltage protection provide safeguards against operating faults.
Specifications
- Type: four-channel Class D marine amplifier
- Dyno-certified continuous output at 2 ohms stereo: 175W RMS x 4; 700W RMS total
- Continuous output at 4 ohms stereo: 115W RMS x 4
- Continuous output at 4 ohms bridged: 350W RMS x 2
- RMS power test conditions: 1kHz, 1% THD+N, 14.4 VDC
- Rated efficiency: 76% at 2 ohms stereo and 4 ohms bridged; 85% at 4 ohms stereo
- Peak output: 700W x 4 at 2 ohms; 460W x 4 at 4 ohms; 2,800W system peak
- Frequency response: 5Hz–45kHz (±3 dB)
- Distortion: under 0.03% THD+N at 1W RMS, 20Hz–20kHz
- Signal-to-noise ratio: 73 dBA, referenced to 1W RMS into 4 ohms
- Stereo separation: -56 dB at 5kHz
- Damping factor: 64.88
- Input sensitivity: 224 mVrms–6.00 Vrms
- Crossover modes: full range, low pass, and high pass
- Adjustable low-pass and high-pass filter range: 50Hz–250Hz
- Operating voltage: 9–16.1 VDC
- Idle current draw: 1A
- Fuse rating: 80A total, with four 20A internal fuses
- Power and ground terminals: 4 AWG
- Speaker outputs: 10 AWG
- Power supply: high-speed MOSFET
- Protection: thermal, short circuit, and over voltage
- Dimensions (L x W x H): 10.43 x 4.92 x 1.81 inches
In the Box
- MRDF-4 marine amplifier
- White silicone terminal covers
- Mounting hardware
- Owner’s manual
- Spare fuses
Questions about this product
Is MRDF-4 in stock?
Yes — 20 units are available and ready to ship from our US warehouse.
How fast will MRDF-4 ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does MRDF-4 ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.