Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Notifier Notifier NMM-100 Standard-Sized Module view 1

Notifier NMM-100 Standard-Sized Module

Notifier
$10.40
In stock — 42 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandNotifier
SKUNMM-100
TypeMonitor Modules
Variants1

Notifier NMM-100 is a standard-sized addressable monitor module for Notifier FireWarden Series intelligent fire alarm control panels. It supervises a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices and reports its status (open, normal or short) to the panel under its own address.

The module is powered directly by the two-wire SLC loop, identifies itself to the panel as a monitor module, and has a panel-controlled LED that flashes during normal operation and latches on steady in alarm. It supports the LiteSpeed communication protocol.

Specifications

Operating voltage 15 to 32 VDC
Maximum current 5.0 mA (LED on)
Average operating current 375 µA (LED flashing, 47k EOL)
IDC wiring resistance 1500 ohms max.
IDC voltage 11 V max.
EOL resistance 47K ohms (provided)
Addressing Rotary switches; 01–99 on FireWarden-100-2, 01–50 on FireWarden-50
Temperature range 32 °F to 120 °F (0 °C to 49 °C)
Humidity 10% to 93% non-condensing
Dimensions 4.5 in. H x 4 in. W x 1.25 in. D

Installation notes

  • Mounts to a 4 in. square box, 2.125 in. deep.
  • SEMS screws with clamping plates for easier wiring.
  • Use for four-wire smoke detectors, pull stations, waterflow switches and other normally open contacts, or for normally open supervisory devices.

Related models

  • NMM-100P: miniature monitor module, Class B, fits a single-gang box behind the device
  • NZM-100: zone module for two-wire 24 V smoke detectors
  • NDM-100: dual monitor module, two Class B circuits
  • NMM-100-10: ten-input monitor module

Documents

FAQ

Which panels does the NMM-100 work with?
It is a monitor module for Notifier FireWarden Series intelligent control panels. Addresses run 01 to 99 on the FireWarden-100-2 and 01 to 50 on the FireWarden-50.

Can it supervise a Class A circuit?
Yes. The monitored circuit can be wired as an NFPA Style B (Class B) or Style D (Class A) initiating device circuit. The 47K ohm end-of-line resistor is provided for Style B; no resistor is needed for Style D.

What devices can it monitor?
A zone of four-wire smoke detectors, manual pull stations, waterflow devices or other normally open dry-contact devices. It can also monitor normally open supervisory devices.

Does it need separate power?
No. It is powered directly by the two-wire SLC loop.

Questions about this product

Is Notifier NMM-100 Standard-Sized Module in stock?

Yes — 42 units are available and ready to ship from our US warehouse.

How fast will Notifier NMM-100 Standard-Sized Module ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Notifier NMM-100 Standard-Sized Module ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping