Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Potter Potter PAD100-MIM Micro Input Module view 1

Potter PAD100-MIM Micro Input Module

Potter
$5.10
In stock — 13 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandPotter
SKUPAD100-MIM
TypeMonitor Modules
Variants1

Potter PAD100-MIM — addressable micro input module that monitors initiating devices with a normally open set of dry contacts, for Potter IPA and AFC/ARC series addressable fire alarm control panels.

The PAD100-MIM is small enough to fit in the electrical box or enclosure behind the device it monitors, which makes it the usual choice for pull stations. It is enclosed in a plastic case to protect against shorts and ground faults and mounts with a single screw. A status LED flashes when the module is polled and flashes at a fast rate when the input is active.

Specifications

Model PAD100-MIM
Protocol PAD addressable protocol
Input One Class B dry contact input (normally open)
SLC wiring Class A, Class X or Class B
Operating voltage 24.0 V
SLC current 200 µA standby and alarm
EOL resistor 5.1K ohm
IDC wiring limits 100 ohm maximum, 1 µF maximum
Modules per loop 127 maximum
Dimensions 1.75 x 1.36 x 0.43 in.
Connections 6 in. pigtail leads
Operating environment 32–120°F (0–49°C), 0–93% RH non-condensing

Installation notes

  • Address 1 to 127 is set with the seven-position DIP switch on the front of the module
  • Mount in a 2-1/2 in. deep single-gang box, typically behind the monitored device
  • Remove power and check field wiring for opens and shorts before connecting to the SLC
  • UUKL certified for smoke control; 5 year warranty

Related models

  • PAD100-SIM: single input module
  • PAD100-DIM: dual input module
  • PAD100-RM: relay module

Documents

FAQ

Which panels support the PAD100-MIM?
It is compatible with Potter IPA and AFC/ARC series addressable fire alarm control panels, and only with systems that use the PAD addressable protocol.

How is it addressed?
With the seven-position DIP switch on the front of the module, for addresses 1 to 127.

What end-of-line resistor does the input need?
A 5.1K ohm EOL resistor on the Class B input circuit.

Where is it mounted?
In a 2-1/2 in. deep single-gang box, usually in the box or enclosure behind the pull station or device it monitors.

Questions about this product

Is Potter PAD100-MIM Micro Input Module in stock?

Yes — 13 units are available and ready to ship from our US warehouse.

How fast will Potter PAD100-MIM Micro Input Module ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Potter PAD100-MIM Micro Input Module ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping