









RD1500.1 Gold
Color
| Brand | Rockville |
|---|---|
| SKU | RD1500.1 GOLD |
| Type | Car Audio and Video~Car Amplifiers~Mono |
| Color | Black, Gold |
| Variants | 1 |
Give your car's subwoofer system dedicated power without giving up a large mounting area. The Rockville RD1500.1 Gold is a mono Class-D amplifier rated at 1500W RMS at 1 ohm, with listed dyno-certified continuous output of 1550W at 1 ohm, 1014W at 2 ohms, and 620W at 4 ohms, each at less than 1% THD+N.
Shape the bass around your subwoofers and enclosure with a 45–200Hz low-pass filter, a 10–50Hz subsonic filter, and up to 12dB of bass boost centered at 45Hz. These adjustments let you set the amplifier's operating range rather than sending the same low-frequency signal to every setup.
The included metal bass remote puts subwoofer-level adjustment within reach and provides a clipping indicator to help you monitor the signal as you adjust it. Power, protect, and clip LEDs on the amplifier provide additional status information, while IC-controlled protection circuitry monitors operation.
A gold chassis measuring 14.35 inches long, 4.92 inches wide, and 1.81 inches high gives you concrete dimensions for planning your installation. Check mounting clearance and ventilation before choosing a location. The amplifier includes 4-gauge power and ground terminals, 8-gauge speaker terminals, Tiffany-style RCA terminals, and an RCA preamp line output.
Specifications
- Design: mono Class-D car amplifier with high-speed MOSFET power supply
- Rated RMS power: 1500W at 1 ohm
- Listed dyno-certified continuous RMS output at less than 1% THD+N: 1550W x 1 at 1 ohm, 1014W x 1 at 2 ohms, and 620W x 1 at 4 ohms
- Listed efficiency at the dyno test points: 71% at 1 ohm, 82% at 2 ohms, and 86% at 4 ohms
- Peak power, separate from continuous RMS output: 6000W x 1 at 1 ohm, 4000W x 1 at 2 ohms, and 2400W x 1 at 4 ohms
- Bass boost: 0–12dB at 45Hz
- Low-pass filter: 45–200Hz
- Subsonic high-pass filter: 10–50Hz
- Frequency response: 10–200Hz
- Preamp circuitry: 8V; adjustable input signal voltage: 0.2–6.0V
- RCA preamp line output with Tiffany-style terminals
- Listed minimum THD at rated power: less than 0.5%
- Signal-to-noise ratio: greater than 75dB, A-weighted at 1W/4 ohms
- Damping factor: greater than 150 at 100Hz
- IC-controlled protection circuitry; power, protect, and clip LED indicators
- Fuse rating: 150A, with external fuse holder and fuse included
- Power and ground terminals: 4 gauge; speaker wire terminals: 8 gauge
- Dimensions (L x W x H): 14.35 x 4.92 x 1.81 inches (364.5 x 125 x 46mm)
- Finish: gold
In the Box
- RD1500.1 Gold amplifier
- Metal bass remote with clipping indicator
- External fuse holder with 150A fuse
- Mounting screws
- Owner's manual
- Warranty card
Questions about this product
Is RD1500.1 Gold in stock?
Yes — 46 units are available and ready to ship from our US warehouse.
How fast will RD1500.1 Gold ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
What color options does RD1500.1 Gold come in?
Available color: Black, Gold. 1 variants in total, each with its own SKU and price.
Where does RD1500.1 Gold ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.