








Square Frame LED Sconce
Size
Colour
Kelvin Range
| Brand | Vakkerlight |
|---|---|
| SKU | VKW9-26522-01 |
| Type | Wall Lamp |
| Colour | Brushed satin nickel |
| Variants | 1 |
A square frame LED sconce — a brushed satin-nickel square panel with a fluted acrylic disc at its center that glows warm from an integrated LED, framed by crossed metal rods that extend past each corner. A clean modern-geometric wall light. 12.6″ × 12.6″ × 2″ deep, integrated LED. For hallways, living rooms, stairwells, and entryway accent walls.
Fluted glow disc
A ribbed acrylic disc diffuses an integrated LED into a soft radiant circle of warm light.
Crossed-rod frame
Brushed satin-nickel rods cross at each corner and extend past the panel for a layered architectural edge.
Integrated LED
Built-in LED in 2700K warm white, no bulb to change. AC 110–240V universal.
The frame and panel are stainless steel in a brushed satin-nickel finish — durable, corrosion-resistant, and consistent piece to piece. The center disc is fluted acrylic, which diffuses the LED evenly without a visible hotspot.
12.6″ × 12.6″ (32 × 32 cm) · 2″ (5 cm) deep. Click the diagram to enlarge.

Click to enlarge ↗
| Material | Stainless Steel, Acrylic |
| Body finish | Brushed satin nickel |
| Shade finish | Frosted fluted acrylic |
| Dimensions | 12.6″ × 12.6″ × 2″ deep (32 × 32 × 5 cm) |
| Light source | Integrated LED · 2700K warm white · dimmable |
| LED service | LED replaceable at authorized service |
| Voltage | AC 110–240V (universal) |
| Mounting | Hardwired wall mount, US junction box compatible |
| Control | Compatible with standard wall switch or dimmer (not included) |
| Certifications | CE (EU) · SAA/RCM (Australia & NZ) · CSA (Canada) · FCC tested (US) — see certificates |
- Hardwired wall install — a licensed electrician is recommended. Mounts over a standard US junction box behind the panel.
- Mount the square level so the crossed rods read true horizontal and vertical; check with a level before final tightening.
- The LED is integrated; end-of-life replacement is handled at authorized service — contact us with your order number rather than replacing the whole fixture.
- Dimmable with a compatible wall dimmer (not included).
- The brushed satin-nickel finish wipes clean with a soft dry or barely damp cloth; avoid abrasive pads that can dull the brushed grain.
- Indoor dry locations only (IP20). Keep clear of direct water and damp areas.
It's fluted acrylic, not glass. The ribbed acrylic diffuses the integrated LED into an even, radiant circle of light without a visible hotspot, and it's lighter and more shatter-resistant than glass. The frame and panel are stainless steel in a brushed satin-nickel finish.
Is the LED replaceable?The LED is integrated and rated over 30,000 hours — roughly 25 years at 3 hours of daily use. It isn't a user-swappable bulb; if it fails within or after the warranty period, contact authorized service with your order number for a replacement LED module rather than replacing the whole fixture.
Is it dimmable, and how bright is it?Yes — the integrated LED is 2700K warm white and dimmable with a compatible wall dimmer (not included). It gives a soft ambient and accent glow rather than bright task light, so it works well in hallways, beside art, or as a living-room accent.
Can I mount it horizontally or only as a square?It's a square, so it reads the same in any 90° rotation — the crossed-rod frame and center disc stay symmetrical. Just mount it level so the rods line up true horizontal and vertical.
Can I install it in a bathroom, and what's the warranty?On a dry wall away from the shower, yes — it's rated IP20 for indoor dry locations, so keep it clear of shower or tub spray. 2-year warranty on the fixture and wiring; the LED is covered under the same warranty. Email support for help — we reply within one business day.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What are the exact dimensions and how deep does it stick out from the wall?+12.6″ × 12.6″ with 2″ depth. It mounts over a standard US junction box, so total projection includes the box—check your wall space before ordering.
What finish is it, and will it tarnish or require special care?+Brushed satin-nickel stainless steel—durable and corrosion-resistant. Wipe clean with a soft dry or barely damp cloth. Avoid abrasive pads that dull the brushed grain.
Can you custom-size this sconce or build it in other finishes?+This model is 12.6″ square in brushed satin nickel. We hand-build fixtures in our own atelier—contact us about custom sizing or finish options for made-to-order projects.
Questions about this product
Is Square Frame LED Sconce in stock?
Yes — 43 units are available and ready to ship from our US warehouse.
How fast will Square Frame LED Sconce ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
What colour options does Square Frame LED Sconce come in?
Available colour: Brushed satin nickel. 1 variants in total, each with its own SKU and price.
Where does Square Frame LED Sconce ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.