





















Victorian Fringe Table Lamp
Size
Colour
Plug Options
| Brand | Vakkerlight |
|---|---|
| SKU | VKT7-26515-04 |
| Type | Table lamp |
| Colour | Walnut Color & Green |
| Variants | 4 |
A vintage style bedside table lamp with a turned solid wood base in walnut finish and a six-panel fabric shade printed with green botanical leaves, edged in gold beaded trim and long beaded fringe. A single E26 or E27 bulb casts warm, filtered light through the panels and down through the fringe — soft ambient glow, not task light. At Ø7.9 in × H16.5 in (Ø20 × H42 cm), it fits standard nightstands, console tables, and dressers, and suits Victorian, bohemian, eclectic, art nouveau, and vintage farmhouse interiors. Common uses: bedroom bedside lamp, living room accent lamp, reading nook mood lighting, and side table décor.

Six-Panel Fabric Shade
Fabric panels with green botanical leaf print, gold beaded edge trim.
Beaded Fringe Trim
Long gold-tone beaded fringe hangs from each panel point.
Turned Wood Base
Solid wood spindle base in walnut finish, weighted for stability.
E26 or E27 Bulb Socket
Standard E26 or E27 base, one bulb. Use any E26 or E27 LED or filament bulb.
Plug-In Cord
US standard plug. Inline on/off switch. No electrician required.
Compact Footprint
Ø7.9 in shade, H16.5 in total — fits standard nightstands.
Each shade is hand-assembled with sewn panels and hand-strung fringe. Small variations in stitching, bead spacing, and print alignment are normal — not defects. Clean with a soft brush or compressed air; do not wash or steam.
For the warmest vintage glow, use a 2700K E26 or E27 LED filament bulb at 40W equivalent or lower. Vintage Edison bulbs (ST64, G80) enhance the warm-light effect.
Click to enlarge ↗ E26 or E27 · 1 bulb · Bulb not included. Compatible with standard E26 or E27 LED, filament, and incandescent bulbs at 110–240V.
| Product type | Table lamp (bedside / accent) |
| Style | Victorian / Bohemian / Vintage |
| Shade | Six-panel fabric with green botanical print, gold beaded trim and fringe |
| Base | Solid wood, turned spindle, walnut finish |
| Dimensions | Ø20 × H42 cm (Ø7.9 × H16.5 in) |
| Bulb base | E26 or E27 × 1 (not included) |
| Wattage | Max 40W (60W equiv. LED recommended) |
| Voltage | AC 110–240V |
| Installation | Plug-in, no electrician required |
| Switch | Inline on/off switch on cord |
| IP rating | IP20 |
| Use environment | Indoor, dry locations only |
| Certification | Listed · North America · CE · SAA · SASO · KC |
- Plug-and-play setup — no wiring or electrician required. Plug directly into a standard US wall outlet.
- Turn on and off with the inline switch on the power cord.
- Screw in an E26 or E27 bulb (not included) before plugging in. Do not exceed 40W incandescent or 60W LED equivalent.
- For indoor use only. Not suitable for bathrooms, kitchens above the sink, or any damp location.
- Place on a flat, stable surface. Keep the fabric shade away from heat sources and open flames.
Best as a bedside lamp on a nightstand, an accent lamp on a living room side table, or a vanity lamp on a dresser. The Victorian shade and beaded fringe suit eclectic, bohemian, art nouveau, vintage farmhouse, and maximalist interiors. Also works in reading nooks and small entryway consoles.
What bulb should I use?One E26 or E27 bulb, 40W max (incandescent) or 60W LED equivalent. A 2700K warm-white LED filament bulb or vintage Edison-style amber bulb (ST64, G80) gives the closest match to the antique look. Bulb not included.
Is the lamp dimmable?No — the lamp has an inline on/off switch only. To dim it, use a dimmable E26 or E27 bulb with a plug-in dimmer module (sold separately). Wall dimmers do not work since the lamp is plug-in, not hardwired.
How do I clean the fabric shade and fringe?Dust with a soft-bristle brush or compressed air, top to bottom. Gently run fingers through the fringe to release tangles. Do not wash, steam, or wipe with water — moisture stains the printed fabric and discolors the beads.
Is this lamp certified for use in North America?Yes. It is listed for North America and also holds CE (Europe), SAA (Australia), SASO (Saudi Arabia), and KC (Korea) certifications. The lamp operates on AC 110–240V worldwide.
Sizing & questions
Every piece is made to order in our own atelier — here is what most clients ask before choosing theirs.
What size nightstand or table will this lamp fit?+At Ø7.9″ with 16.5″ total height, it fits standard nightstands, console tables, and dressers. The compact footprint won't overcrowd a typical bedside surface.
Does it require an electrician to install?+No. It's plug-and-play with a standard US outlet and inline on/off cord switch. Screw in an E26 or E27 bulb, plug in, and turn on. No wiring needed.
Questions about this product
Is Victorian Fringe Table Lamp in stock?
Yes — 27 units are available and ready to ship from our US warehouse.
How fast will Victorian Fringe Table Lamp ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
What colour options does Victorian Fringe Table Lamp come in?
Available colour: Walnut Color & Green. 4 variants in total, each with its own SKU and price.
Where does Victorian Fringe Table Lamp ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.
All variants (4)
| Size | Colour | Plug Options | SKU | Price | Stock |
|---|---|---|---|---|---|
| Ø 7.9″ × H 16.5″ | Walnut Color & Green | US Plug | VKT7-26515-04 | $16.50 | In stock |
| Ø 7.9″ × H 16.5″ | Walnut Color & Green | UK Plug | VKT7-26515-03 | $16.50 | In stock |
| Ø 7.9″ × H 16.5″ | Walnut Color & Green | AU Plug | VKT7-26515-01 | $16.50 | In stock |
| Ø 7.9″ × H 16.5″ | Walnut Color & Green | EU Plug | VKT7-26515-02 | $16.50 | In stock |